BIODEGRADABLE LUBRICANTS
Applications:
Reccommended for use as a premium anti-wear hydraulic fluid in all types of vane, gear, and piston pumps and to protect against environmental issues in many industries such as:
• Cities and Counties
• State and Federal Agencies
• Irrigation Districts
• Waste Management
• Barges and Shipping
• Bridge Hydraulics
• Elevator Service
• Street Sweeping
• Construction Equipment
• Water and Foundation Drilling
BIODRAULIC
Heavy Duty Biodegradable Hydraulic Fluid
No. 309 ISO: 32,46,68
BIODRAULIC HYDRAULIC FLUID is a premium quality, highly oxidation stable, anti-wear lubricant. This vegetable based product has been formulated to meet and exceed the requirements set forth by most hydraulic pump manufactures, and is stable enough to be used in both high temperature and high pressure systems. BIODRAULIC HYDRAULIC FLUID has a unique rust and oxidation inhibiting system that assures the highest level of rust and oxidation protection availiable. BIODRAULIC HYDRAULIC FLUID is a clear choice for use in applications on or near water.
BIODRAULIC HYDRAULIC FLUID can be used in most applications that require an R&O or AW hydraulic fluid, and will provide environmental safety without sacrificing performance.
BIODRAULIC HYDRAULIC FLUID meets the definition of a bio-based lubricant as outlined in section 9001 of the Farm Security and Rural Investment Act (FSRIA) of 2002 and qualifies for prefeered procurement by U.S. Federal Agencies as set forth in (FSRIA Section 9002).
Hydraulic systems are constantly subjected to adverse conditions such as water, heat, high pressures, and long operating intervals. Bearing, pump, valve gear, motor and cylinder wear are very common, and gum and varnish buildup lead to poor system performance.
Oil deterioration and rapid oxidation of conventional bio based fluids results not only in excessive wear, but frequent overhauls, rancid smells and poor filterability. Deterioration of seals and o-rings lead to increased oil consumption. BIODRAULIC HYDRAULIC FLUID is formulated to greatly reduce these problems and provide maximum environmental safety. Spill and leakage issues are a thing of the past.
PERFORMANCE CHARACTERISTICS:
• Ultimate biodegradability; Biodraulic is a ASTM D5864 PW1 rated hydraulic fluid. It exhibits the highest level of biodegradability in the industry. (>60% degraded at 28 days.)
• Non Toxic; Biodraulic passes the LC-50 criteria adopted by the United States EPA and the United States Fish and Wildlife Service.
• Oxidation resistant; Oxidation inhibitors and premium quality base oils combine to form a product with outstanding resistance to oxidation and provide the maximum protection against varnish formation at both high and low temperatures. This feature will allow for drain intervals commensurate with conventional oils.
• Provides excellent anti-wear protection; Special anti-wear, extreme pressure and friction reducing additives provide the highest level of protection against wear and scuffing in all types of vane, piston, and gear pumps used in both low and high pressure hydraulic systems.
• Superior rust protection; Inhibitors protect both steel and yellow metal surfaces against rust and corrosion. Vastly outperforms other Bio-based fluids.
• Demulsibility; Designed to separate rapidly from water.
• High foam resistance; Foam inhibitors provide a high level of foam resistance to prevent pump starvation and damage.
• High viscosity index; To insure viscosity stability.
• Superior filterability; New technology allows for better filterability and no freeze capability previously unseen in vegetable based fluids.
TYPICAL APPLICATIONS:
Recommended for use as a premium anti-wear hydraulic fluid in all types of vane, gear, and piston pumps and to protect against environmental issues in many industries:
• Non Toxic; Biodraulic passes the LC-50 criteria adopted by the United States EPA and the United States Fish and Wildlife Service.
• Oxidation resistant; Oxidation inhibitors and premium quality base oils combine to form a product with outstanding resistance to oxidation and provide the maximum protection against varnish formation at both high and low temperatures. This feature will allow for drain intervals commensurate with conventional oils.
• Provides excellent anti-wear protection; Special anti-wear, extreme pressure and friction reducing additives provide the highest level of protection against wear and scuffing in all types of vane, piston, and gear pumps used in both low and high pressure hydraulic systems.
• Superior rust protection; Inhibitors protect both steel and yellow metal surfaces against rust and corrosion. Vastly outperforms other Bio-based fluids.
• Demulsibility; Designed to separate rapidly from water.
• High foam resistance; Foam inhibitors provide a high level of foam resistance to prevent pump starvation and damage.
• High viscosity index; To insure viscosity stability.
• Superior filterability; New technology allows for better filterability and no freeze capability previously unseen in vegetable based fluids.
TYPICAL APPLICATIONS:
Recommended for use as a premium anti-wear hydraulic fluid in all types of vane, gear, and piston pumps and to protect against environmental issues in many industries:
Cities and Counties
Barges and Shipping
State and Federal Agencies
Irrigation Districts
Waste Management
Construction Equipment
Bridge Hydraulics
Water and Foundation Drilling
Elevator Service
Street Sweeping
SUMMARY:
Hydraulic systems are constantly subjected to adverse conditions such as water, heat, high pressures, and long operating intervals. Each of these factors affects the ability of the hydraulic system to provide maximum output when needed. Bearing, pump, valve, gear, motor and cylinder wear are very common. Gum and varnish buildup lead to poor system performance. Oil deterioration and rapid oxidation of conventional bio based fluids results not only in excessive wear, but frequent overhauls, rancid smells and poor filterability. Deterioration of seals and O-rings lead to increased oil consumption. Biodraulic hydraulic fluid is formulated to greatly reduce these problems and provide maximum environmental safety. Spill and leakage issues are a thing of the past.
SERVICE APPLICATIONS:
Biodraulic hydraulic fluid meets and exceeds the following service requirements for hydraulic pumps:
Vickers 1-286-S, M-2950-S Denison HF-1, HF-2, HF-0
General Motors LH-04-1, LH-06-01, LH-15-1 Jeffrey No. 87
Cincinnati Milacron P-68, P-69, P-70 Lee Norse 100-1
Ford M-6C32 U.S. Steel 127,136
B.F. Goodrich 0152 Commercial Shearing
TYPICAL SPECIFICATIONS:
Oxidation Stability,
TOST, ASTM D943, hr1 700+
ASTM 2266 Four Ball Wear Test
40 KG, 1 hour @ 167 F (mm) Scar 0.35
Corrosion test, Steel,
(ASTM D665) Procedure B: Pass
Foam Test ASTM D-892
Available foam after 10 min. Nil
Rust Test ASTM D-665 A/B
Distilled Water Pass-clean
Synthetic Sea Water Pass-clean
Demulsibility Test ASTM D-1401 Pass
ISO Grade 32 46 68
Viscosity @ 40º C, cSt: 31.3 43.5 64.6
Viscosity @ 100º C, cSt: 6.8 9.8 12.73
Viscosity Index: 185 220 201
Flash Point, COC, ºF 460 470 485
Pour Point, ºF: -40 -35 -30
Color, Saybolt: +30 +30 +30