SEARCH
See the amount of money you save when equipment's properly maintained.
CLICK HERE


Compressor / Refrigeration Oils



For every 18 F above the maximum discharge temperature listed, the expected lubricant life will be reduced by half.


Air compressors are constantly subjected to adverse conditions such as dust, moisture, heat, high speeds, long operating intervals and high pressures. Each of these factors affects the ability of the compressor to provide maximum output when needed. Bearing, ring, vane, gear, rotor and cylinder wear are very common. Carbon, gum and varnish buildup lead to reduced efficiency and failure. Oil deterioration results not only in excessive wear, but higher energy costs and more downtime.

 

AIR GUARD 15,000 AIR COMPRESSOR OIL
ISO 32, 46, 68, 100
No. 603
Air Guard 15,000 is a premium quality ashless, highly oxidation stable, anti-wear lubricant, blended from high viscosity index hydro-processed group II base oils and specially selected additives.

Air Guard 15,000 can be used in a wide variety of compressor applications where manufacturers recommend R&O or AW type oil. This includes piston and screw type compressors.

Air Guard 15,000 contains special friction reducing and anti-oxidation additives that make this an extremely long life lubricant (15,000 hour oxidation rate).




RCD SERIES
SYNTHETIC AIR COMPRESSOR LUBRICANTS           
No: FS 604                  ISO 32, 46, 68, 100, 125, 150
RCD Synthetic Lubricants are unique combinations of quality diester base stocks and the latest additive technology. Frontier provides a wide range of DSL® lubricants that cover applications for rotary vane, rotary screw, and all ages and design types of reciprocating compressors

RCD Synthetic Lubricants are designed for use in the crankcase and as a cylinder lubricant.

RCD Synthetic Lubricants are compatible with almost all elastomers used in compressors and pumps, including paint used in crankcases.




ALLSYN FG AIR 
Synthetic Air Compressor Oil
No: FS 660                          ISO 100, 200, 300, 500


ALLYN FG AIR
lubricants are specially designed for rotary screw, vane and reciprocating compressors being used in the food service industry.

ALLYN FG AIR lubricants are NSF Registered and meet USDA 1998 (H-1) guidelines (lubricants with incidental food contact).

ALLSYN FG AIR Series lubricants are formulated from the highest quality synthesized hydrocarbon fluids available. The special additive system is blended with the synthetic base-fluid to provide extended lubricant life and to protect against wear, rust and corrosion.





ALLSYN AIR
Synthetic Air Compressor Oil
No: FS 323                         ISO 32, 46, 68, 100, 150
ALLSYN AIR lubricants are manufactured from the highest quality PAO (polyalphaolefin) base stocks and advanced additive technology.

ALLSYN AIR
lubricants are recommended for rotary screw, centrifugal, and reciprocating compressors and offer many advantages over petroleum-based lubricants as well as some synthetics - especially where compatibility is an important concern.

ALLSYN AIR
lubricants have low pour points, high viscosity indices and excellent water Demulsibility

ALLSYN AIR
lubricants are compatible with commonly used seal materials and equipment designed for use with petroleum oils.




ALLSYN MAX AIR
Universal Synthetic Compressor Oil          
No. FS 321                                            ISO 46, 68
 
ALLSYN MAXAIR is a high performance lubricant formulated specifically to outperform other synthetic rotary compressor lubricants on the market.

ALLSYN MAX AIR employs a unique base stock that allows improvements in oxidation resistance and sludge and deposit formation over conventional synthetic base stocks.

ALLSYN MAX AIR is also compatible with existing O.E.M. provided lubricants.




PG SUPER COOLANT
Synthetic Compressor Coolant                       
No. FS 901                                           SAE 10w/20
PG SUPER COOLANT has been formulated to address the specific problems associated with conventional rotary screw compressor coolants - thermal degradation and deposit formation.

PG SUPER COOLANT's polyglycol/ester blend has proven itself superior in the areas of oxidation resistance and deposit formation.

PG SUPER COOLANT is the alternative to varnish, sludge and the frequent lubricant changes associated with hydrocarbon oils.




ALLSYN NG
Synthetic Natural Gas Compressor Oil
No. FS 328                             ISO 68, 100, 150, 220
ALLSYN NG lubricants are formulated from the highest quality synthetic hydrocarbon base stocks.

ALLSYN NG
lubricants are extended life fluids with special additives to protect equipment from wear, rust and hydrogen sulfide corrosion.

ALLSYN NG lubricants are designed for rotary screw and reciprocating compressors in natural gas service.

ALLSYN NG lubricants have low pour points, high viscosity indices and excellent water demulsibility.

Consult your Frontier representative for assistance in choosing the proper fluid for your application.




ALLSYN REFRIGERATION
Synthetic Compressor Oil
No: FS 900                                            ISO 32, 68
ALLSYN Refrigeration Oils are alkylate based and formulated for use in reciprocating, rotary, and centrifugal refrigeration compressors using ammonia, R12, R22, R114 and R502.

ALLSYN Refrigeration Oils are extremely stable at high compression temperatures while providing excellent low temperature properties at evaporator temperatures below -50°F.

ALLSYN Refrigeration Oils other performance benefits include excellent solubility with refrigerants, good compatibility with construction materials, extended service life, and reduced deposit formations in high and low temperature areas.




SYNBLEND REFRIGERATION
Synthetic Blend Refrigeration Compressor Oil
No: FS 902                                ISO 32, 46, 68, 100
SYNBLEND REFRIGERATION oils are a highly refined, hydro-treated ammonia compressor lubricants, specially designed to function under the stringent requirements of closed-loop ammonia refrigeration systems. Besides providing value-added benefits in the areas of improved system efficiency and higher productivity.

SYNBLEND REFRIGERATION oils are exceptionally well suited for rotary screw and reciprocating compressors in ammonia service. They are compatible with naphthenic and other hydro-treated paraffinic-based compressor oils for ammonia service, as well as PAO and alkylbenzene-based products. 

SYNBLEND REFRIGERATION are compatible with all seal  commonly used in these systems including Buna-N, NBR and Neoprene.




ALLSYN MAX-REFRIGERATION
Synthetic Refrigeration Compressor
No: FS 906                                ISO 32, 46, 68, 100
ALL SYN-MAX REFRIGERATION is a synthesized hydrocarbon-alkylate 100% full-synthetic formulation for reciprocating, rotary, and centrifugal refrigeration compressor applications using any of several refrigerants including ammonia (R717), R12, R13, R22, R113, R114, R123, R401A, R401B, R402B, R409A, R500, R502 and R503.




SYNPAR RC
Synthetic Blend Air Compressor Fluid
No. FS329                       ISO 32, 46, 68, 100, 150

SYNPAR RC Series premium synthetic blend lubricants are a blend of synthetic and petroleum base fluids specially designed for compressor applications and are useful in multi-purpose applications.

SYNPAR RC Series lighter grades are also

well suited for gas and steam turbine applications.
 

SYNPAR RC Series are manufactured using the highest quality base stocks, additive treated with rust and corrosion inhibitors, oxidation control agents, anti-wear compounds and defoamants

and is exceptional at controlling sludge and deposits.


Please contact your Frontier representative for specific 
product recommendations.

 

 

 

 




<