Greases - Food Grade - Lubricant : Frontier Food Safe Lubricants

Food Grade Lubricants

Frontier's Performance Line of Food Safe Lubricants.

PURE GUARD FM GREASE
PARA-SYNTHETIC FOOD MACHINERY GREASE; USDA/FDA H-1 RATED, NSF No. 650

Pure Guard FM Food Grade Grease is an H-1 extremely tacky, long -life, adhesive/cohesive, high temperature grease with a minimum drop point of 500 degrees F.

Pure Guard FM Food Grade Grease is formulated with the most advanced additive technology on the market today. This superior chemistry, combined with high viscosity index hydro processed group II base oils and synthetic base oils, allow Pure Guard FM Grease to give extended protection against corrosion and wear and provide extreme acid and chemical resistance.

Pure Guard FM Food Grade Grease with it's adhesive/cohesive properties, prevent wash out and pound out in the most extreme conditions.

PURE GUARD FM
ISO 46, 68
No. 651-A

PURE GUARD FM FOOD GRADE LUBRICANTS are superior quality anti-wear lubricants. They have been specifically formulated for use in equipment where U.S.D.A. H-1 lubricants are specified because of the chance of incidental contamination of food or beverage.

PURE GUARD FM FOOD GRADE LUBRICANTS are also intended for use in equipment where the oil may end up in sewers, waterways or other ecologically sensitive areas.

PURE GUARD FM FOOD GRADE LUBRICANTS are scientifically compounded with the highest quality U.S.D.A. approved white oils and the most technically advanced, U.S.D.A./ F.D.A. authorized non-toxic performance additives. This advanced technology reduces downtime and lubrication problems caused by exposure to heat, contaminants, and frequent water washing.

PURE GUARD FM FOOD GRADE LUBRICANTS have specialized oxidation stability resulting in longer oil life and less deposit formation. They offer excellent protection against friction, wear, moisture, acids, and corrosion and are clean and non-staining.

PURE GUARD FM FOOD GRADE LUBRICANTS have an extremely high film strength and load carrying capability, and provide cooler, more efficient operation with greatly reduced downtime.

PURE GUARD FM
FOOD GRADE GEAR OIL USDA H-1 (ISO 220)
No. 652-A

PURE GUARD FM FOOD GRADE GEAR OILS are superior quality anti-wear adhesive/cohesive lubricants. They have been specifically formulated for use in equipment where U.S.D.A. H-1 lubricants are specified because of the chance of incidental contamination of food or beverage. They are also intended for use in equipment where the oil may end up in sewers, waterways or other ecologically sensitive areas.

PURE GUARD FM FOOD GRADE GEAR OILS are scientifically compounded with the highest quality U.S.D.A. approved white oils and the most technically advanced, U.S.D.A./ F.D.A. authorized non-toxic performance additives. This advanced technology reduces downtime and lubrication problems caused be exposure to heat, contaminants, and frequent water washing

ALLSYN FG AIR (FOOD GRADE)
Synthetic Air Compressor Oil
ISO 100, 200, 300, 500 No. FS660

ALLYN FG AIR lubricants are specially designed for rotary screw, vane and reciprocating compressors being used in the food service industry. These fully synthetic lubricants are NSF Registered and meet USDA 1998 (H-1) guidelines (lubricants with incidental food contact).

ALLSYN FG AIR Series lubricants are formulated from the highest quality synthesized hydrocarbon fluids available. The special additive system is blended with the synthetic base-fluid to provide extended lubricant life and to protect against wear, rust and corrosion.

ALLSYN FG HYDRAULIC
ISO 32, 46, 68, 100, 150
No. FS664

ALLSYN FG HYDRAULIC oils are formulated specially for hydraulic systems operating in the food service, beverage, and packaging industry.

ALLSYN FG HYDRAULIC oils are fully synthetic lubricants and approved by the U.S.D.A. for H-1 applications (lubricants with possible incidental food contact) and comply fully with the requirements of F.D.A. 21 CFR 178.3570.

ALLSYN FG HYDRAULIC oils are fortified with oxidation inhibitors, corrosion inhibitors, as well as anti-wear additives to enhance the superior qualities offered by the synthetic hydrocarbon base stock.

ALLSYN FG HYDRAULIC oils are extended life lubricants and have the same excellent software compatibility as the ALLSYN HYDRAULIC non food grade hydraulic oils.

ALLSYN FG GEAR
ISO 150, 200, 320, 460
No. FS670

Allsyn FG Gear gear oils are specially formulated for gear systems operating in the food service and packaging industries.

Allsyn FG Gear lubricants are NSF Registered and meet USDA 1998 (H-1) guidelines (lubricants with incidental food contact).

Allsyn FG Gear lubricants are fortified with oxidation inhibitors as well as anti-wear/EP additives to pass the highest stages of the FZG test.

Allsyn FG Gear oils are ideal for the lubrication of production equipment in :

Beverage canning,
Bottling operations,
Meat and poultry processing,
Dairy operations,
Fruit and vegetable processing,
Bakeries, and
Pharmaceutical plants.

FOOD-SAFE SILICONE LUBRICANT
Case of 12 Aerosol cans
No. 874

Food Safe Silicone Lubricant (Aerosol) is a unique blend of food grade silicones designed to lubricate equipment used in the packaging and processing industry.

Food Safe Silicone Lubricant (Aerosol) is specifically formulated to reduce friction and eliminate sticking and binding on metal, plastic, rubber, glass, fabric and laminate surfaces.

Food Safe Silicone Lubricant (Aerosol) is rated for incidental food contact (H1) on food packaging and processing equipment. It leaves a quick drying, non-staining, pure silicone film that lubricates moving parts and decreases wear and heat by reducing friction of the treated surfaces.