Grease
Applications:
- Lubricate Ball and Roller Bearings
- Gears
- Screw Actuators
- Electrical Contacts
- Assembly Lube on O-Rings and other Gaskets for aerospace, automotive and industrial applications
IMG
Industrial& Manufacturing Grease
No. 124
IMG is a heavy duty multipurpose EP (extreme pressure) grease designed for automatic grease dispensing systems where long lubricant dispensing lines are common. IMG is designed for low or high speed plain and rolling element bearings and sliding mechanisms operating under generally difficult conditions such as found in steel mills, assembly plants, and paper corrugating plants. IMG is specially formulated to provide maximum, long lasting protection to bearings, bushings, sliding surfaces and other areas exposed to severe conditions of pounding, heat, moisture , or heavy loading. IMG is excellent in applications where there is a need to provide extended component life while reducing excessive grease consumption.
Special additive technology and highly refined petroleum oils give IMG excellent oxidative and thermal stability, and high film strength under extreme pressure conditions. A proprietary calcium sulfonate complex base provides high dropping point, mechanical stability, and extremely low oil bleed characteristics ensuring protection at high temperatures and high radial forces. IMG has exceptional resistance to water washout and corrosion.
TYPICAL APPLICATIONS:
IMG is ideal where hot and cold, low and high-speed bearings must share the same lubricant. It is extremely effective for wet and hot end use for roll neck journal bearings found in paper and steel mill operations. IMG is excellent for use in heavily loaded hinge pins, splines, CV and universal joints, rolling mills, slabbing mills and many other uses including:
Anti-Friction Bearings King Pins
Plain Bearings Bucket Pins
Sliding Surfaces Truck Chassis
Small Open Gears Disc Brakes
Conveyors Wheel Bearings
Couplings Automatic Lube Systems
…and many other areas requiring the use of a superior extreme pressure grease for extended service.
PERFORMANCE CHARACTERISTICS:
IMG will provide superior, long lasting protection against:
Extreme pressure Water washout
Elevated temperatures Acid contamination
Rust and oxidation Corrosion
High temperature oil volatilization Channeling due to cold temperature
TYPICAL SPECIFICATIONS:
|
|
||||
|
Property |
Test Method |
Units |
IMG # 1.5 |
IMG # 2 |
|
Color & Texture |
Visual |
|
Light Blue |
Light Blue |
|
Kinematic Viscosity of Base Oils @ 40 ° C |
ASTM D 445 |
cSt (SUS) |
260 (1205)
|
216 (1000 SUS)
|
|
Worked Penetration, 60 Strokes @ 25°C |
ASTM D-217 |
mm/10 |
290 - 315 |
270 - 295 |
|
Mechanical Stability |
ASTM D-217 % change from P60 |
P 100.000 Strokes P 10,000 Strokes w/ 50% H2O |
2.3 %
< 6.0% |
2.5 %
< 6.0% |
|
Shell Roll Stability ASTM D-1831 % change from P60 < 4.0 % < 4.0 % |
||||
Timken OK Load |
ASTM D-2509 |
lbs. / kg. |
60/27 |
60/27 |
|
4-Ball EP Weld Load LWI |
ASTM D-2596 |
Kgf. |
500 kg. > 75 |
500 kg. > 75 |
|
4 Ball Wear, Scar Dia. (40kg., Load, 1200 RPM, 75°C, 1-hr.) |
ASTM D-2266 |
Average Wear Scar in mm |
0.42 mm |
0.42 mm |
|
Dropping Point |
ASTM D 2265 |
°C (°F) |
>290 (554) |
300 (572) |
|
Rust Test Copper Corrosion Salt Fog Spray |
ASTM D-1743 ASTM D-130 ASTM B-117 |
Rating Classification Hours to Failure |
Pass 1b >1000 hrs. |
Pass 1b >1000 hrs. |
|
Water Washout |
ASTM D-1264, @ 80 ° C |
% Loss |
< 2.2 % |
< 2.0 % |
|
Oxidation Bearing Life Rotary Bomb Oxidation |
ASTM D-3527 ASTM D-942 |
Hrs. PSI drop, 500 hrs. |
200 6.0 lbs. |
200 6.0 lbs. |
*Values shown here are typical, and may vary.