HYDRAULIC / TRANSMISSION OILS
Applications:
- ROAD GRADERS
- BULLDOZERS
- LIFT TRUCKS
- BACKHOES
- LOADERS
- CHERRY PICKERS
- DUMP TRUCKS
- CRANES
- HAUL TRUCKS
LOW TEMP SEMI-SYNTHETIC AW
HYDRAULIC OIL
No. 307
PERFORMANCE CHARACTERISTICS:
• Seal compatibility
Compatible with all normal hydraulic component seal material. Will not dry out seals and Orings , as with other low temp. hydraulic oils.
• Oxidation resistant (8,000 hours in the ASTM-D943 Oxidation Test)
Oxidation inhibitors and premium quality base oils combine to form a product with outstanding resistance to oxidation and provide the maximum protection against varnish formation at both high and low temperatures. This feature will extend drain intervals.
• Provides excellent anti-wear protection
Special anti-wear, extreme pressure and friction reducing additives provide the highest level of protection against wear and scuffing.
• Friction reduction
Exclusive friction reducing additives provide reduced operating temperature and reduced horsepower requirements in comparison to other low temperature hydraulic oils.
• Superior rust protection
Inhibitors protect both steel and yellow metal surfaces against rust and corrosion.
• Demulsibility
Designed to separate rapidly from water.
• High foam resistance
Foam inhibitors provide a high level of foam resistance to prevent pump starvation and damage.
• High viscosity index
To insure viscosity stability at both standby and operating temperatures.
• Superior filterability
Compatible with all normal hydraulic component seal material. Will not dry out seals and Orings , as with other low temp. hydraulic oils.
• Oxidation resistant (8,000 hours in the ASTM-D943 Oxidation Test)
Oxidation inhibitors and premium quality base oils combine to form a product with outstanding resistance to oxidation and provide the maximum protection against varnish formation at both high and low temperatures. This feature will extend drain intervals.
• Provides excellent anti-wear protection
Special anti-wear, extreme pressure and friction reducing additives provide the highest level of protection against wear and scuffing.
• Friction reduction
Exclusive friction reducing additives provide reduced operating temperature and reduced horsepower requirements in comparison to other low temperature hydraulic oils.
• Superior rust protection
Inhibitors protect both steel and yellow metal surfaces against rust and corrosion.
• Demulsibility
Designed to separate rapidly from water.
• High foam resistance
Foam inhibitors provide a high level of foam resistance to prevent pump starvation and damage.
• High viscosity index
To insure viscosity stability at both standby and operating temperatures.
• Superior filterability
SERVICE APPLICATIONS:
Low Temp Semi-Syn AW Hydraulic Oil is intended for use in mobile hydraulic systems operating in deep freezers
and in mobile equipment operating in arctic conditions, such as:
Road Graders
Bulldozers
Lift trucks
Backhoes
Loaders
Cherry Pickers
Dump Trucks
Cranes
Haul Trucks
TYPICAL SPECIFICATIONS:
Oxidation Stability,
TOST, ASTM D943, hr 1 8,000+
ASTM 2266 Four Ball Wear Test
30 KG, 1 hour @ 167° F Scar 0.50
Copper Corrosion,
(ASTM D130) 1A
Foam Test ASTM D-892
Available foam after 10 min. Nil
Rust Test ASTM D-665 A/B
Distilled Water Pass-clean
Synthetic Sea Water Pass-clean
Demulsibility Test ASTM D-1401 Pass
ISO Grade 15 32
Viscosity @ 40º C, cSt: 16.1 33.3
Viscosity @ 100º C, cSt: 3.69 5.6
Viscosity Index: 116 106
Pour Point, ºF: -80 -55
Color, Saybolt: 1.0 1.0
Values shown hear are typical, and may vary.