HYDRAULIC / TRANSMISSION OILS
Applications:
- MOST GEAR OR CIRCULATING SYSTEMS REQUIRING AW, RO FLUID
- CIRCULATION OIL SYSTEMS
- AGMA GEAR SYSTEMS
- REDUCTION GEARS (NON-EP)
- PLAIN BEARINGS
- WORM DRIVES
- AND MORE...
PRO GUARD AW INDUSTRIAL
MULTI-PURPOSE MACHINE LUBRICANT
No. 305
PERFORMANCE CHARACTERISTICS:
• Oxidation resistant (6,000 hours in the ASTM-D943 Oxidation Test)
Oxidation inhibitors and premium quality base oils combine to form a product with outstanding resistance to oxidation. This feature is designed for long drain intervals and for minimizing the formation of sludge and varnish.
• Provides excellent anti-wear protection
Special ashless anti-wear additives protect against wear in high pressure pumps and other equipment under heavy loads.
• Friction reduction
Exclusive friction reducing additives provide reduced operating temperature and reduced horsepower requirements in comparison to conventional industrial oils.
• Superior rust protection
Inhibitors protect metal parts from moisture during operation and shut down.
• Demulsibility Designed to separate rapidly from water.
• High viscosity index to insure viscosity stability
• Superior filterability
Oxidation inhibitors and premium quality base oils combine to form a product with outstanding resistance to oxidation. This feature is designed for long drain intervals and for minimizing the formation of sludge and varnish.
• Provides excellent anti-wear protection
Special ashless anti-wear additives protect against wear in high pressure pumps and other equipment under heavy loads.
• Friction reduction
Exclusive friction reducing additives provide reduced operating temperature and reduced horsepower requirements in comparison to conventional industrial oils.
• Superior rust protection
Inhibitors protect metal parts from moisture during operation and shut down.
• Demulsibility Designed to separate rapidly from water.
• High viscosity index to insure viscosity stability
• Superior filterability
TYPICAL APPLICATIONS:
Most gear or circulating systems requiring an AW, RO fluid, such as:
Circulation oil systems
Reduction gears (Non-EP)
Antifriction bearings
AGMA gear systems
Gears requiring non-EP
Plain bearings Reciprocating air compressors
General machine lube
Worm drives
SUMMARY:
Lubrication systems are constantly subjected to adverse conditions such as water, heat, long operating intervals, heating and cooling and high pressures. Each of these factors affect the ability of the system to provide maximum output when needed. Bearing, pump, valve, gear, motor and cylinder wear are very common. Gum and varnish buildup lead to poor system performance. Oil deterioration and oxidation results not only in excessive wear, but frequent overhauls as well. Deterioration of seals and Orings lead to increased oil consumption.
Pro Guard AW industrial Oils are formulated to greatly reduce this problem and provide maximum system efficiency.
TYPICAL SPECIFICATIONS:
Oxidation Stability,
TOST, ASTM D943, hr 1 6,000+
ASTM 2266 Four Ball Wear Test
40 KG, 1 hour @ 167º F Scar 0.4
Foam Test ASTM D-892 Pass
Rust Test ASTM D-665 Pass
Demulsibility Test ASTM D-1401 Pass
