AIR GUARD 15,000


No. 603 – ISO 32, 46, 68, 100


  • Reciprocating
  • Compressors
  • Screw Compressors
  • Lobe Compressors
  • Rotary Compressors
  • Blowers

Air Guard 15,000 is a premium quality ashless, highly oxidation stable, anti-wear lubricant, blended from high viscosity index hydro-processed group II base oils and specially selected additives. This lubricant can be used in a wide variety of compressor applications where manufacturers recommend R&O or AW type oil. This includes piston and screw type compressors. Special friction reducing and anti-oxidation additives make this an extremely long life lubricant (15,000 hour oxidation rate).

Air compressors are constantly subjected to adverse conditions such as dust, water, heat, high speeds, long operating intervals and heavy pressures. Each of these factors affects the ability of the compressor to provide maximum output when needed. Bearing, ring, vane, gear, rotor and cylinder wear are very common. Carbon, gum and varnish buildup lead to ceasing of operation. Oil deterioration results not only in excessive wear, but frequent overhauls as well.

AIR GUARD 15,000 Compressor oil is formulated to greatly reduce these problems and provide maximum compressor efficiency.


    • Oxidation resistant (15,000 hours in the ASTM-D943 Oxidation Test)

      Oxidation inhibitors and premium quality base oils combine to form a product with outstanding resistance to oxidation. This feature is designed for long drain intervals and for minimizing the formation of sludge and varnish.

    • Provides excellent anti-wear protection

      Special ashless anti-wear additives protect against wear in high pressure pumps and other equipment

      under heavy loads.

    • Friction reduction

      Exclusive friction reducing additives provide reduced operating temperature and reduced horsepower requirements in comparison to conventional compressor oils.

    • High flash point

      For reduction of carbon build-up

    • Superior rust protection

      Inhibitors protect metal parts from moisture during operation and shut down.

    • Demulsibility

      Designed to separate rapidly from water.

    • High viscosity index to ensure viscosity stability
    • Superior filterability