800-807-4497 [email protected]

PIVOT GUARD

Semi-Fluid Gear Lubricant

No. 1150

Applications

  • Stabilizing Agents
  • Extreme Pressure Additives
  • Polar additivesOxidation Inhibitors
  • Anti-Wear Agents
  • Rust and Corrosion Inhibitors
  • Adhesive/Cohesive Additives

PIVOT GUARD #1150 Gear Oil is designed for use in both pivot and linear sprinkler worm driveboxes. It has heavy paraffin base oils and a proprietary synthetic polymer to both slow water intrusion and to separate completely from any entrained water. PIVOT GUARD#1150 contains special extreme pressure and anti-wear additives specifically designed for the sliding contact of gear teeth. The use of #1150 will significantly reduce maintenance costs associated with topping off of gearboxes which have damaged seals and or cases.

PIVOT GUARD #1150 is a long life adhesive/cohesive gear oil designed for use in pivot drive gear boxes.PIVOT GUARD#1150 is a very high viscosity fluid. This combined with the latest technology in anti-wear, extreme pressure, rust and corrosion protection and high viscosity index hydro-processed group II base oils make PIVOT GUARD #1150 an extremely sheer stable, water resistant gear lubricant.

The outstanding rust and corrosion protection contained in PIVOT GUARD #1150 makes it ideally suited for gears and bearings exposed to high moisture levels.

FEATURES:

Frontier’s exclusive XFT additive system makes this product particularly resistant to fretting, corrosion and micro pitting and protects the gears from surge and shock loading, vibration, and damage from reversing gears or slight misalignment. XFT forms a unique film on the metal surfaces reducing friction and asperity contact. XFT contains an exclusive polar additive that will maintain an oil presence on gears and bearings during idle conditions or in low RPM applications.#1150 is specifically formulated to provide maximum, long lasting protection to bearings, bushings, sliding surfaces and other areas exposed to severe conditions of pounding, moisture contamination, or heavy loads.

#1150 has a proprietary polymer package combined with High Viscosity Index Hydro-processed group II base oil and compounded with specialized additives including:

  • Stabilizing Agents
  • Extreme Pressure Additives
  • Polar additivesOxidation Inhibitors
  • Anti-Wear Agents
  • Rust and Corrosion Inhibitors
  • Adhesive/Cohesive Additives

TYPICAL APPLICATIONS:

#1150 was designed specifically for use in the drive gear boxes of pivot and linear sprinkler systems. To obtain the full benefits of Pivot Guard #1150 Gear Oil thoroughly clean and drain the pivot gear case unit of the old fluid. This will prevent contamination from the old oil and optimize performance.

TYPICAL SPECIFICATIONS:

Typical Specification ASTM Specification Pivot Guard ISO 1000 EP Gear Oil
AGMA Specification No. 8 A
ISO VG Grade 1000
Viscosity @ 40°C, cSt D-445 1000
Viscosity @ 100°C, cSt D-445 93.8
Viscosity Index (Typical) D-2270 159
Flash Point, COC °F (°C) D-92 590 (310 °C)
Fire Point, COC °F (°C) D-92 645 (340 °C)
Pour Point, °F D-97 +10
Rust Inhibition D-665 Pass
Copper Corrosion, 3 hrs. @100°C D-130 1b
Timken OK Load, Lbs. D-2782 65lb./29.5 kg/
FZG Test, Load Stages Passed D-5182 12+
4 Ball EP Weld Load, kg. D-2783 315
4 Ball Wear Test, 40 kg Load.,1800 RPM, 75°C, 1 hour, Ave.Wear Scar, mm D-2783 0.53