THERMAL GUARD

Para- Synthetic Gear Lube SAE 85w/140

No. 202

Applications

  • Tractors
  • Graders
  • Buses
  • Logging Equipment
  • Backhoes
  • Automotive
  • Excavators
  • Farm Implements
  • More Below

Thermal Guard is a premier all season gear lubricant which contains a superior performance blend of high viscosity index hydro processed group II base oil, the highest quality synthetic base oil and Frontier Lubricant’s exclusive MTX moly friction reducer additive package.

Thermal Guard provides exceptional performance in both high and low temperature applications, performance far beyond that required by industry and OEM specifications.

Thermal Guard's unique formulation keeps critical parts cleaner because it prevents sludge and deposits, even under sustained high-temperature operation. This extends service life by preventing the formation of deposits that can cause premature seal and bearing failure. The potential for thermal breakdown and deposits is far greater today than ever before due to the severe conditions present in modern drive trains.

Thermal Guard contains the most advanced thermally stable additive system on the market today.

COMPOSITION:

  • Anti-foam Additives
  • Demulsibility Additive
  • Oiliness Additives
  • Oxidation Inhibitors
  • Pour Point Depressants
  • Cohesive Additives
  • Anti-wear Additives
  • Extreme Wear Additives
  • Adhesive Additives
  • Corrosion Inhibitors
  • Hydroprocessed Group II Oil
  • Rust Inhibitors
  • MTX Moly Friction Reducer
  • PAO Synthetic Oil

USES:

  • Transmissions
  • Worm Gears
  • Helical Gears
  • Hypoid Gears
  • Spiral-Bevel Gears
  • Power Drivers
  • Spur Gears
  • Speed Reducers
  • Planetary Axles
  • Wheel Bearings
  • Final Drives
  • Coniflex Straight
  • Differentials
  • Industrial Gears
  • Bevel Gears
  • Angular Gears
  • Straight Bevel Gears
  • Ring Gears
PERFORMANCE CAPABILITIES:
Thermal Guard meets and exceeds the rugged requirements of:
Military Specifications:

MIL-L-2105E

MIL-L-2105D Mack Truck EO-G, GO-H

API Service GL-2, GL-3, GL-4,GL5

API Service MT-1

Mack Truck EO-G, GO-H

Volkswagen TL-727

Volvo 97310

Proposed PG-2

Rockwell International 0-76-A, 0-76-B

Scania

TYPICAL SPECIFICATIONS:

SAE Grade 85w/140
AGMA Viscosity Rating 7EP
API Service Designation GL5
Timken Load Test, lb.: 70
Viscosity @ 100°C, cSt: 29.5
Viscosity @ 40°C, cSt: 370
Viscosity Index 140
Gravity, ° API: 26.9
Pounds/Gallon: 7.44
Flash Point, COC, °F: 420
Pour Point, °F: -15
Corrosion, 3 hrs @ 212°F: Pass
Thermal Oxidation Stability Test Pass
Adhesive/Cohesive Additive Yes
Oxidation Inhibited Yes