Applications:
- Diesel Engines
- Diesel fuel treatment
POWER MIX 500 ULSD
MULTI-FUNCTIONAL FUEL TREATMENT
No. 512
Power Mix 500 ULSD is a multi-functional diesel fuel treatment designed to clean and maintain the cleanliness of fuel systems, increase engine efficiency and replace the natural lubricity removed from fuel during the hydro cracking process used to make Ultra Low Sulfur Diesel (ULSD). The continual use of this product will reduce the overall operating cost of diesel engines by providing a fuel that will minimize injector wear, injector fouling and tip erosion allowing engines to operate at peak performance and maintain optimum fuel efficiency.
Power Mix 500 ULSD exceeds the requirements set forth by both Cummins and Caterpillar for both cleanliness and anti-wear. It increases the lubricity of ULSD to meet or exceed the specification regarding lubricity in diesel established by the American Society for Testing and Materials (ASTM). This lubricity specification comes under the ASTM D-975 Standard Specification for Diesel Fuel. Power Mix 500 is blended from pure mineral base oils and select additives that provide: Detergency, Lubricity, Stabilizers, Demulsifiers, Cold Flow Improver, Cetane Improver, Corrosion Inhibitors and Anti-Rust.
Recommended treat rate, 1gallon to 500 gallons .
FOR USE IN DIESEL FUEL ONLY!!
COMPOSITION:
Power
Mix 500 ULSD is blended from pure mineral base oils and select additives that
provide:
|
Detergency |
Corrosion
Inhibitor |
Lubricity |
Burn
Improvers |
|
Demulsifiers |
Cetane
Improvers |
Stabilizers |
|
PERFORMANCE
CHARACTERISTICS:
When
used consistently Power Mix 500 ULSD will provide the following benefits:
• Increased fuel burn efficiency
An average of 7.7% decrease in fuel
consumption in over the road fleet testing and 8.2% decrease in fuel
consumption in off road heavy equipment.
• Increases power
Cleans the fuel delivery system and the fuel
injector tips and orifices, correct spray patterns are
maintained, allowing the fuel to burn more
efficiently.
• Passes and exceeds the Cummins diesel fuel
engine tests (Ll0 and N14)
These
tests are designed to provide fuels that will minimize injector fouling and
erosion
problems.
• Provides
the needed lubricity not found in ultra low sulfur diesel fuel
Reduces friction, protects the fuel injector
pump and minimizes the effect of metal-to-metal contact and wear in the
injectors.
• Reduces
engine emissions and black smoke
• Removes
and prevents carbon deposits in the combustion chamber
• Provides
TDC pulse optimization
• Provides
corrosion protection for the fuel tank, lines, pump and injectors
• Provides
fuel storage stability and prevents gums, varnishes, sludge and moisture
build-up in storage tanks
• Increases
fuel filter life
• Mixes
easily with fuel; can be poured directly into vehicle or bulk storage diesel
tanks
Power
Mix Fuel Treatments have been used at some sites continuously since their
introduction in 1994 and have been placed in over 200,000,000 gallons of fuel.
