ALLSYN-HEAVY GEAR

Synthetic Gears/Bearings

No. 228 – ISO 32-46-68-100-150-220-320-460-680-1000

Applications

  • Ring Gears
  • Worm Gears
  • Helical Gears
  • Hypoid Gears
  • Spiral-Bevel Gears
  • Power Drivers
  • Spur Gears
  • Speed Reducers
  • Angular Gears
  • More Below

Allsyn-Heavy Gear-228 Series synthetic gear lubricants are formulated using synthesized hydrocarbon fluid and select additives to enhance oxidation resistance and provide maximum protection against wear, rust, corrosion and foaming.

Allsyn-Heavy Gear-228 Series lubricants substantially reduce power consumption and gearbox operating temperature, further prolonging the useful life of the lubricant.

Allsyn-Heavy Gear-228 Series lubricants are recommended for use under severe high or low temperature conditions when lubricating industrial enclosed gears and heavily loaded plain or rolling element bearings. They are particularly recommended for applications where high oil temperatures result in short oil life or high maintenance costs.

Allsyn-Heavy Gear-228 ISO 32 through ISO 1000 are also recommended for use in applications where the corrosion of yellow metals is a concern, as these lubricants do not contain additives which tend to attack metals such as brass, bronze or copper.

Allsyn-Heavy Gear-228 Series lubricants are compatible with essentially all seal materials, plastics and paints, including nitrile Buna N, neoprene, viton, teflon, polyethylene, polyurethane ether, fluorocarbon, polyacrylate, polysulfate, ethylene acrylic, epoxy, plastisol, PVC, acrylic paint and lacquer.