PURE GUARD FM GREASE
Dust Control Agent
- Mining operations
- Construction sites
- Unpaved parking areas
NO DUST is a vinyl acetate polymer dust control product that is designed to prevent dust in areas having heavy vehicle traffic. The recommended dosage of 4%, mixed in water, will form a mechanically high resistant elastic and waterproof coating. The crust will resist vehicle tires and remain hard without producing any dust for several weeks. It can be used to treat almost any soil or aggregate type under a wide temperature range.
Any equipment capable of spraying water can be used safely to apply the NO DUST dilution to the application site. Alkyl phenol ethoxylate surfactants are not used in NO DUST. Copolymer emulsions are noncorrosive to equipment and are safe for operators to handle.
Place 4% of the tanks volume of NO DUST in the application tank. (4 gal of No Dust per 100 gal of water). Fill the tank with water to capacity; the agitation from the hose or stand pipe used to fill the tank is sufficient to thoroughly mix NO DUST, it is not necessary to pre-dilute.
Apply one quart per square yard of this solution, let dry. One application will form a hard solid crust which will remain for several weeks. For maximum long term effect reapply a second coat.
Once NO DUST is applied topically or mixed into the soil/aggregate, the polymer molecules coalesce and crosslink, forming bonds between the soil or aggregate particles. As the water dissipates from the soil or aggregate, a durable matrix of solid mass is created.
- Environmentally friendly
- Works with indigenous soil
- Sticks to itself
- All weather stable
- Water insoluble on curing
- Non-toxic / non-hazardous
- Dries clear and colorless
- Stops wind erosion
- Stops water erosion
- Stabilizes surfaces and subsurface
- Reduces or prevents pollution
- Does not leach out of soil
|pH (at 20°C, 100 g/l)||4.5|
|Pounds per gal||8.9|
|Bulk viscosity (cps)||< 1000|
|Storage temperature (°F)||40-85|
* Shelf life is 12 months, when stored inside, at temperatures between 40°F and 85°F.
- Plastic drums 440 lbs
- Liquid totes 2,200 lbs
The information presented in this technical bulletin is given in good faith and is true and accurate to the best of our knowledge. No warranty or guarantee is expressed or implied regarding the accuracy of such data. It is the user’s responsibility to determine the suitability for use of the information presented.